D46 Luer Module

Housed microporous polypropylene hollow fiber membrane degassing / contactor module. Degassing water/liquid in benchtop systems, laboratory analyzers and OEM devices.

Polypropylene hollow fiber membrane
1.5m² P60 active membrane surface
Transparent compact PC housing
Large Luer, smooth hose barb D6mm port connections

Characteristic

Membrane Type		P60	P80
Membrane	Material	Polypropylene (natively hydrophobic)
	Pore size	average 0.1 μm
	OD/ID	310/240 μm	530/440 μm
	Burst / Collapse pressure	>5.5 / >3.5 bar
Module	Active Membrane Surface	1.5 m²	0.95 m²
	Priming Volume Shellside	ml	ml
	Priming Volume Lumenside	ml	ml
	Housing Material	PC transparent
	Potting Material / Seals	Polyurethane / O-rings VMQ
	Shell pressure	< 3 bar
	Temperature	< 45°C
	Ports	Large Luer, D6mm hose barb smooth
	Dimensions	D63 - 310mm
	Weight	250g

① food grade, no additives PP is used, but due to production small amounts of other materials might be used, please consult us for chemical resistance
② VMQ O-ring softer option is possible
③ ports are smooth hose barb OD6mm suitable for medical PVC hose glue on or large luer slip.

Possible Applications

Gas transfer, microporous hollow fiber membrane is used so gas/liquid or liquid/gas
Gas filtration - gas/solids separation on microfiltration level
Membrane degassing - lab, OEM applications

Applications Notes

Ports are PC plastic, for gluing PVC hose use suitable cyanoacrylate glue tolerant to PC.
Try to avoid temperature shocks, slow change is preferable. For contactor (liquid / gas, degassing) applications temperature gradients might cause condensation inside the pores, wetting and module bleeding. When this happens thorough drying (dry air @50°C at least 24 hours) will restore the module.
No oxidizing chemistry or UV light – PP membrane is very sensitive. For chemical cleaning use standard NaOH / citric acid procedure.
Chemical resistance can be estimated from used materials PP, PC, polyurethane, usually least resistant is potting - polyurethane.